Elite Crokinole Wall Mount Hardware
In stock!
This WALL MOUNT hardware kit is ONLY compatible with our ELITE boards or other boards that are totally flat on the back with some ‘feet’ of at least 1/2 inch of clearance between the board and the table (or wall when mounted). Yes that means these are compatible with Brown Castle, Tracey, Willard and many other brands.
Don't pay $99 Canadian + tariffs +brokerage fees for a similar products, get it here and save a bundle!
If you have a Mayday board from a prior year it should have eyelets on it so you can just run picture wire or string between the two eyelets to secure it to the wall.
Our ELITE boards are flat on the back so we needed a special way to mount these to the wall.
This hardware set includes:
- Board mounting plate and four screws to attach it to your ELITE board
- Wall bracket and two screws to attach to wall
- Full-color instructions
Watch this video for a walkthrough of how to mount to the wall:
Want more? Consider picking up our CLOCK accessory HERE to turn your board into a handsome clock!
WARNING:
A few customers have received 4 of the longer and 2 of the shorter screws. This is an error from the factory! You should carefully check your mounting set to ensure you get 4 shorter screws (to go into your board) and 2 longer screws (to go into the wall). If you put 4 of the longer screws in the board, you will punch through the board and ruin it! If you do have 4 longer and 2 shorter screws email us at support@maydaygames.com and DO NOT PROCEED WITH INSTALLATION! Note the longer screws are 30 MM long while the shorter ones are 20 MM long, so finding replacements is cheap and easy too.
WARNING: DO NOT USE WITH OUR STANDARD BOARDS unless you are willing to do some custom installation similar to this, putting it through on the thicker top-part of the base as shown below:
