{"title":"Repair Parts","description":"\u003cp\u003eTransform your gaming experience with our \u003cstrong\u003econsole, handheld console, and controller repair parts\u003c\/strong\u003e. Whether you’re dealing with a cracked screen, faulty joystick, worn buttons, or charging issues, we carry the right components to help restore performance and extend the life of your device.\u003c\/p\u003e\n\u003cp\u003eExplore parts for popular systems and controllers, including \u003cstrong\u003ereplacement buttons, thumbsticks, D-pads, analog modules, charging ports, flex cables, triggers, membranes, and more\u003c\/strong\u003e. Our goal is simple: make it easier to get back to play with dependable repair solutions for gamers everywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop confidently\u003c\/strong\u003e—find compatible repair parts, follow your preferred repair method, and upgrade your setup without replacing the entire console.\u003c\/p\u003e","products":[{"product_id":"game-boy-advance-replacement-speaker","title":"Game Boy Advance Replacement Speaker","description":"\u003cp\u003eA replacement speaker for the Game Boy Advance, the same size and impedance as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e the original Game Boy Advance (AGB-001), the wide horizontal model. Not the clamshell SP, which uses a different speaker we list separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixes:\u003c\/strong\u003e sound that crackles, buzzes, cuts in and out, or has gone completely dead on a console that otherwise works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck this first, free:\u003c\/strong\u003e plug headphones in. If the sound through headphones is clean, the fault is after the amplifier, which points at the speaker or its solder joints. If headphones are also bad, the speaker is not your problem and you want the GBA capacitor set instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the GBA is famously quiet even when healthy, so compare against another one before deciding yours is faulty. Genuinely dead is obvious. Merely quiet is just how they are.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single Piece","offer_id":67481099174129,"sku":"P71534-1","price":7.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481099206897,"sku":"P71534-5pk","price":34.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481099239665,"sku":"P71534","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBA-main-2.png?v=1794283031"},{"product_id":"sega-genesis-64-pin-connector","title":"Sega Genesis 64 Pin Connector","description":"\u003cp\u003eA replacement 64-pin cartridge slot connector for the Sega Genesis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Genesis Model 1, 2 and 3 cartridge slots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms it fixes:\u003c\/strong\u003e games that need wiggling to boot, a black screen with a known-good cartridge, and graphics that glitch until the game is reseated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e this is the console-side slot, not a cartridge part. The old connector is soldered through the mainboard, so fitting one means desoldering 64 pins. It is very doable, but it is the most demanding repair in this category.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099272433,"sku":"sku-45325230375074","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/genesis-64pin-1.webp?v=1794283030"},{"product_id":"n64-controller-cable-red-replacement-lead","title":"N64 Controller Cable - Red Replacement Lead","description":"\u003cp\u003eA replacement cable for the Nintendo 64 controller in red, with the plug already fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e standard Nintendo 64 controllers. Matches the Watermelon Red Funtastic pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixes:\u003c\/strong\u003e a controller that works only when the cable is held at a certain angle, inputs that cut out when the lead moves, and a cable split or frayed where it leaves the controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they fail there:\u003c\/strong\u003e the strain relief takes every tug of being pulled out by the cord rather than the plug. The copper breaks before the jacket shows anything.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the controller has to come apart to fit this. Phillips driver, and patience with the Z-trigger spring.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099141361,"sku":"P38300","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/front_red-white.jpg?v=1794283031"},{"product_id":"game-boy-advance-sp-capacitor-fix-audio-issues-1-piece-smd","title":"Game Boy Advance SP Capacitor - Fix Audio Issues (1 Piece SMD)","description":"\u003cp\u003e\u003cstrong\u003eFix Your Game Boy Advance SP Audio and Power Issues\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRestore your Game Boy Advance SP to perfect working condition with this replacement surface-mount electrolytic capacitor. Essential repair part for fixing common GBA SP problems caused by aging capacitors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat This Fixes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Sound or Distorted Audio:\u003c\/strong\u003e Restore clear, crisp sound to your GBA SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Issues:\u003c\/strong\u003e Fix problems with the console not turning on or shutting off unexpectedly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitor Failure:\u003c\/strong\u003e Replace old, failing capacitors before they damage your board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Crackling:\u003c\/strong\u003e Eliminate static, popping, or crackling sounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhy Replace Capacitors?\u003c\/strong\u003e The Game Boy Advance SP is over 20 years old, and its original capacitors have degraded over time. Failed capacitors are the #1 cause of audio problems and power issues in GBA SP handhelds. Replacing them restores your console to like-new performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Surface-mount electrolytic capacitor (SMD)\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eQuality: High-grade replacement component\u003c\/li\u003e\n\u003cli\u003eApplication: Game Boy Advance SP mainboard repair\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e 1 surface-mount electrolytic capacitor designed specifically for GBA SP mainboards\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Nintendo Game Boy Advance SP (all models - AGS-001 frontlit and AGS-101 backlit)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e This is an ADVANCED repair requiring micro-soldering skills and specialized equipment. Not recommended for beginners. Professional installation strongly recommended. You must identify which specific capacitor on your GBA SP board has failed and replace it accordingly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePerfect For:\u003c\/strong\u003e Electronics repair technicians, experienced modders, or anyone with soldering skills who wants to repair their GBA SP's audio or power issues\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099305201,"sku":"P68203","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBA-SP-Cap.png?v=1794283031"},{"product_id":"game-gear-capacitor-set-va0-va1-board-recap-kit-fix-sound-video","title":"Game Gear Capacitor Set - VA0\/VA1 Board Recap Kit (Fix Sound \u0026 Video)","description":"\u003cp\u003e\u003cstrong\u003eGame Gear with no sound, or a screen that stays black?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery Game Gear needs a recap eventually - not most, every one. The original capacitors leak onto the board and take the audio out first, then the video. A Game Gear that powers on with sound but no picture, or picture but no sound, is almost always this and nothing else.\u003c\/p\u003e\u003cp\u003eThis is the VA0\/VA1 board set - the most common revision. \u003cstrong\u003eCheck yours before you buy\u003c\/strong\u003e, the marking is on the board inside the shell, and VA4 takes a different set. Inspect for corroded traces while the board is open; leaked electrolyte does not stop at the caps.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099501809,"sku":"P68469","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/P68469-GameGear-v01.jpg?v=1794283031"},{"product_id":"n64-region-adapter-tray-play-japanese-ntsc-j-games","title":"N64 Region Adapter Tray - Play Japanese NTSC-J Games","description":"\u003cp\u003e\u003cstrong\u003eJapanese N64 cart will not sit in a US console?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is not a lockout chip. NTSC-J cartridges are keyed with different notches, so the US cartridge tray physically blocks them. Swap the tray and the cartridge drops straight in - no chip, no soldering, no modification to the board.\u003c\/p\u003e\u003cp\u003eInstalls in place of the OEM tray inside the console.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099403505,"sku":"M07566","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/n64-cartridge-1-main.jpg?v=1794283031"},{"product_id":"psp-1000-lens-laser-khm420aaa","title":"PSP 1000 Lens Laser (KHM420AAA)","description":"\u003cp\u003eA complete replacement laser assembly for the PSP 1000 UMD drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e PSP 1000 drives built around the KHM-420AAA laser. Check the number printed on your existing laser before ordering - the PSP 1000 shipped with more than one laser type and they are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms it fixes:\u003c\/strong\u003e discs that spin but never load, \"cannot read UMD\" errors, and games that load from cold then fail once the drive warms up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e this is the whole assembly rather than a bare lens, so there is no lens alignment to get wrong. The drive has to come out of the shell and the ribbon cable is fragile, so work slowly at that end.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099469041,"sku":"sku-45356049694882","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/PSP1000-laser-main.jpg?v=1794283032"},{"product_id":"game-boy-color-capacitor-set-mainboard-recap-kit-fix-sound-power","title":"Game Boy Color Capacitor Set - Mainboard Recap Kit (Fix Sound \u0026 Power)","description":"\u003cp\u003e\u003cstrong\u003eSound gone crackly, or the screen only wakes up sometimes?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGame Boy Colors are nearly thirty years old and the surface-mount capacitors on the mainboard dry out. You get scratchy or dead audio, a screen that needs a smack to start, or a console that powers on and then quits. None of that is the LCD and none of it is the cartridge slot - it is the caps.\u003c\/p\u003e\u003cp\u003eThis is the full mainboard set for a GBC recap. Soldering required: these are SMD parts and you will want fine tweezers, flux and a decent iron. If you have never recapped a board before, practise on a dead one first.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099337969,"sku":"P68222","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBC-cap-set.png?v=1794283030"},{"product_id":"game-boy-advance-sp-charging-port-replacement-power-jack-solder-in","title":"Game Boy Advance SP Charging Port - Replacement Power Jack (Solder-In)","description":"\u003cp\u003eThe charging port is the number one hardware failure on a Game Boy Advance SP. Two decades of the barrel plug being pushed in, pulled out and knocked sideways works the jack loose from the board, until the console only charges when the cable is held just right, then stops charging at all. This is a direct replacement charging port for the GBA SP. Solder it in and the system charges normally again.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this fixes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOrange charge light only comes on when the cable is wiggled or propped up\u003c\/li\u003e\n\u003cli\u003eNo charge at all with a known-good charger\u003c\/li\u003e\n\u003cli\u003eLoose, rattling or wobbly port\u003c\/li\u003e\n\u003cli\u003eBent or pushed-in port from a drop\u003c\/li\u003e\n\u003cli\u003eA console that runs fine on a charger but will not hold any charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eSold as a \u003cstrong\u003esingle port\u003c\/strong\u003e. One is all a GBA SP needs.\u003c\/p\u003e\n\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGame Boy Advance SP, model AGS-001, the frontlit original\u003c\/li\u003e\n\u003cli\u003eGame Boy Advance SP, model AGS-101, the brighter backlit revision\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth revisions use the same port, so you do not need to know which one you have before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eDoes not fit\u003c\/h3\u003e\n\u003cp\u003eThe Game Boy Micro and the Nintendo DS and DS Lite use different ports. The original Game Boy Advance (AGB-001) runs on AA batteries and has no charging port at all.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOpen the SP. You need a tri-wing driver for the shell and a Phillips for the board screws.\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery and lift the main board out.\u003c\/li\u003e\n\u003cli\u003eDesolder the old port and clean the pads with wick before fitting the new one.\u003c\/li\u003e\n\u003cli\u003eSeat the new port flush, solder the pins and the anchor tabs, and check for bridges.\u003c\/li\u003e\n\u003cli\u003eReassemble and confirm the orange charge light with a charger plugged in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoldering job on a small board. If you are not set up for it, a local repair shop can usually fit this in under an hour with the part supplied.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eP48903\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eDC charging port \/ power jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eSoldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the port or the battery?\u003c\/strong\u003e If the orange light comes on when you hold the cable at an angle, it is the port. If it charges fine but dies quickly once unplugged, it is the battery. We stock GBA SP batteries separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to know if mine is AGS-001 or AGS-101?\u003c\/strong\u003e No. The port is the same in both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I do this without soldering?\u003c\/strong\u003e No. The port is soldered directly to the main board, so there is no drop-in version of this repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an original Nintendo part?\u003c\/strong\u003e No, it is a third-party replacement built to the original footprint.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single","offer_id":67481099567345,"sku":"P48903-1","price":3.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481099600113,"sku":"sku-50787712204962","price":12.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481099632881,"sku":"sku-50787712237730","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBA-SP-main_c6f4f089-b545-4c05-8700-78a990d3a61b.webp?v=1794283031"},{"product_id":"game-boy-advance-capacitor-set-mainboard-recap-kit-fix-sound-screen","title":"Game Boy Advance Capacitor Set - Mainboard Recap Kit (Fix Sound \u0026 Screen)","description":"\u003cp\u003e\u003cstrong\u003eAudio cutting out, or the screen washing out on you?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GBA's mainboard caps are the usual culprit behind dead or distorted speaker audio and a display that flickers or dims. People replace the screen first and are surprised when nothing changes - the screen was fine, the power rail feeding it was not.\u003c\/p\u003e\u003cp\u003eFull mainboard set for an AGB-001 recap. SMD soldering required. Worth doing at the same time as any screen mod, since the board is already open.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099370737,"sku":"P68215","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBA-cap-set-main.jpg?v=1794283031"},{"product_id":"game-boy-pocket-capacitor-set-mainboard-recap-kit-4-pieces","title":"Game Boy Pocket Capacitor Set - Mainboard Recap Kit (4 Pieces)","description":"\u003cp\u003eA full set of replacement surface-mount electrolytic capacitors for the Game Boy Pocket mainboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Game Boy Pocket (MGB-001).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms it fixes:\u003c\/strong\u003e weak or crackling sound, a screen that takes several seconds to appear, washed-out contrast, and a console that only behaves on fresh batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the original capacitors are approaching thirty years old and dry out whether the console has been used or not, so a recap is the standard fix rather than a last resort. This is SMD work - fine-tip iron or hot air, flux, and patience.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099436273,"sku":"P68239","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBP-cap-set-main.jpg?v=1794283031"},{"product_id":"nintendo-3ds-bottom-lcd-screen-replacement-display","title":"Nintendo 3DS Bottom LCD Screen - Replacement Display","description":"\u003cp\u003eA replacement lower LCD for the original Nintendo 3DS, the display panel that sits under the touch layer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e the original Nintendo 3DS (CTR-001), bottom screen only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixes:\u003c\/strong\u003e a cracked lower screen, lines or bands across it, dead pixels, and a bottom screen that has gone black while the top still works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is the LCD, not the digitizer.\u003c\/strong\u003e If the picture is fine but touch does not register or lands in the wrong place, the touch layer is your problem and we sell that separately. If you can see cracks or lines in the image itself, this is the part you need. Plenty of repairs need both, because whatever cracked the glass usually cracked the panel too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the 3DS is a tight build with ribbons routed under the board. No soldering, but set aside an evening the first time.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099534577,"sku":"M07697","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/m07697.jpg?v=1794283031"},{"product_id":"ps1-psone-optical-laser-lens-replacement-fix-disc-read-errors","title":"PS1 \/ PSone Optical Laser Lens - Replacement (Fix Disc Read Errors)","description":"\u003cp\u003e\u003cstrong\u003eFix Your PS1\/PSOne Disc Reading Problems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIs your PlayStation 1 or PSOne having trouble reading discs, skipping during gameplay, or refusing to load games? This brand new laser lens replacement is the solution to restore your console to perfect working order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat This Fixes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Read Errors:\u003c\/strong\u003e Console won't recognize or load game discs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkipping \u0026amp; Freezing:\u003c\/strong\u003e Games that skip, freeze, or have audio\/video glitches during play\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow Loading:\u003c\/strong\u003e Excessive loading times or games that take multiple attempts to start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\"Please Insert PlayStation Disc\" Error:\u003c\/strong\u003e Console doesn't detect discs at all\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhy Replace the Laser Lens?\u003c\/strong\u003e The laser lens is the most common failure point in PS1 consoles. Over time, the lens wears out and loses its ability to properly read game discs. Replacing it is often the only way to revive a non-working PlayStation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuality Replacement:\u003c\/strong\u003e Brand new laser lens assembly designed to restore proper disc reading functionality\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e PlayStation 1 (PS1) and PSOne (slim model) consoles\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Requires opening your console and basic technical skills. Soldering may be required depending on your console model.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099665649,"sku":"M07691","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/m07691.jpg?v=1794283031"},{"product_id":"gamecube-repair-replacement-cable-for-controller-indigo-purple","title":"Gamecube Repair Replacement Cable for Controller (Indigo\/Purple)","description":"\u003cp\u003eA replacement controller cable for GameCube pads in indigo\/purple, with the 6-pin connector already attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Nintendo GameCube controllers. The cable colour matches the Indigo and Purple shells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms it fixes:\u003c\/strong\u003e a controller that disconnects mid-game, rumble that drops out, and the break at the strain relief where the cable leaves the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the connector is pre-fitted, so you solder only at the controller end. You will need the correct driver to open a GameCube pad before you start. Soldering required.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099698417,"sku":"sku-45712345563298","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/NGC-indigo-controlelrcable-main.jpg?v=1794283031"},{"product_id":"sega-game-gear-replacement-speaker","title":"Sega Game Gear Replacement Speaker","description":"\u003cp\u003eA replacement speaker for the Sega Game Gear, the same size and impedance as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e all Game Gear board revisions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRead this before you buy.\u003c\/strong\u003e On a Game Gear, no sound is almost never the speaker. These consoles were built with capacitors that leak as they age, and dead or crackling audio is the single most common symptom of that. The honest advice is to recap the board first. We sell the capacitor sets for both the VA0\/VA1 and VA4 boards, and that is the repair that actually fixes most Game Gears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen the speaker genuinely is the problem:\u003c\/strong\u003e visible damage to the cone, a speaker that rattles against its housing, or sound that stays wrong after a successful recap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e leaking capacitor fluid can corrode nearby components including the speaker wires, so on a badly affected board you may need both. Recap first, then judge.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single Piece","offer_id":67481099862257,"sku":"P71262-1","price":7.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481099895025,"sku":"P71262-5pk","price":34.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481099927793,"sku":"P71262","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/Game-Gear-main.png?v=1794283031"},{"product_id":"nintendo-ds-lite-charging-port-replacement-power-jack-solder-in","title":"Nintendo DS Lite Charging Port - Replacement Power Jack (Solder-In)","description":"\u003cp\u003eThe charging port is the most common hardware failure on a DS Lite. After years of the cable being pushed in, pulled out and yanked sideways, the jack loosens on the board and the console only charges when you hold the plug just right, then stops charging at all. This is a direct replacement charging port for the Nintendo DS Lite. Solder it in and the console charges normally again.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this fixes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOrange charge light only comes on when the cable is wiggled or held in place\u003c\/li\u003e\n\u003cli\u003eNo charge at all with a known-good charger\u003c\/li\u003e\n\u003cli\u003eLoose, rattling or wobbly port\u003c\/li\u003e\n\u003cli\u003eBent or pushed-in port from a drop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eSold as a \u003cstrong\u003esingle port\u003c\/strong\u003e. One is all a DS Lite needs.\u003c\/p\u003e\n\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNintendo DS Lite (USG-001), all colors and regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes not fit\u003c\/h3\u003e\n\u003cp\u003eThe original DS \"phat\", DSi, DSi XL and 3DS family use different ports. We stock the DSi charging port separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOpen the DS Lite (tri-wing and Phillips screws), remove the battery and the back shell.\u003c\/li\u003e\n\u003cli\u003eDesolder the old port from the main board and clean the pads with wick.\u003c\/li\u003e\n\u003cli\u003eSeat the new port, solder the pins and the anchor tabs, and check for bridges.\u003c\/li\u003e\n\u003cli\u003eReassemble and confirm the orange charge light with a charger plugged in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoldering job on a small board. If you are not set up for it, a local repair shop can usually fit this in under an hour with the part supplied.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eP48825\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eDC charging port \/ power jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eSoldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePort or battery?\u003c\/strong\u003e If the light comes on when you hold the cable at an angle, it is the port. If it charges fine but dies quickly off the charger, it is the battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the DSi port?\u003c\/strong\u003e No. They look similar but are not interchangeable. Check the model number on the back label before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an original Nintendo part?\u003c\/strong\u003e No, it is a third-party replacement built to the original footprint.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single","offer_id":67481099763953,"sku":"P48825-1","price":3.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481099796721,"sku":"sku-50787712270498","price":12.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481099829489,"sku":"sku-50787712303266","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/NDSL-2-main.webp?v=1794283031"},{"product_id":"nintendo-dsi-charging-port-replacement-power-jack-solder-in","title":"Nintendo DSi Charging Port - Replacement Power Jack (Solder-In)","description":"\u003cp\u003eA DSi that only charges when the cable is held at just the right angle, or has stopped charging altogether, almost always has a worn or broken charging port. The jack is soldered straight to the main board and takes years of plugging, unplugging and cable tugs. This is a direct replacement charging port for the Nintendo DSi. Swap it in and the console charges like new.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this fixes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCharger has to be wiggled or held in place to get the orange light\u003c\/li\u003e\n\u003cli\u003eConsole will not charge at all with a known-good charger\u003c\/li\u003e\n\u003cli\u003eLoose, rattling or wobbly port\u003c\/li\u003e\n\u003cli\u003eBent or pushed-in port from a dropped console\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eSold as a \u003cstrong\u003esingle port\u003c\/strong\u003e. One is all a DSi needs.\u003c\/p\u003e\n\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNintendo DSi (TWL-001), all colors and regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes not fit\u003c\/h3\u003e\n\u003cp\u003eThe DS Lite, DSi XL and 3DS family use different ports. We stock the DS Lite charging port separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOpen the DSi (tri-wing and Phillips screws) and remove the battery and the back shell.\u003c\/li\u003e\n\u003cli\u003eDesolder the old port from the main board. Clean the pads with wick before fitting the new one.\u003c\/li\u003e\n\u003cli\u003eSeat the new port, solder the pins and the anchor tabs, and check for bridges.\u003c\/li\u003e\n\u003cli\u003eReassemble and confirm the orange charge light with a charger plugged in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoldering job on a small board. If you have not done surface work before, a local repair shop can usually fit this in under an hour with the part supplied.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eP48947\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eDC charging port \/ power jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eSoldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know it is the port and not the battery?\u003c\/strong\u003e If the orange light comes on when you hold the cable at an angle, it is the port. If the light comes on solid but the console dies fast off the charger, it is the battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same port as the DS Lite?\u003c\/strong\u003e No. The DSi and DS Lite ports look similar but are not interchangeable. Make sure you order the one for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an original Nintendo part?\u003c\/strong\u003e No, it is a third-party replacement built to the original footprint.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single","offer_id":67481100124401,"sku":"P48947-1","price":3.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481100157169,"sku":"sku-50787712139426","price":12.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481100189937,"sku":"sku-50787712172194","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/Dsi-port-main.webp?v=1794283031"},{"product_id":"game-boy-dmg-replacement-speaker","title":"Game Boy DMG Replacement Speaker","description":"\u003cp\u003eA replacement speaker for the original Game Boy DMG, the same size and impedance as the one Nintendo fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e the original Game Boy DMG-01. Solders to the existing pads on the board, so no modification is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixes:\u003c\/strong\u003e sound that crackles, buzzes, cuts in and out, or has gone completely dead on a console that otherwise works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck this first, free:\u003c\/strong\u003e plug headphones in. If the sound through headphones is clean, the fault is after the amplifier, which points at the speaker or its solder joints. If headphones are also bad, the speaker is not your problem and you are looking at the capacitors or the amp instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e DMG speakers often fail at the joints rather than the cone. Reflowing the two pads costs nothing and fixes it surprisingly often. Try that before you desolder anything.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Single Piece","offer_id":67481100026097,"sku":"P71901-1","price":7.99,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":67481100058865,"sku":"P71901-5pk","price":34.99,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":67481100091633,"sku":"P71901","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GB-dmg-speaker-main.png?v=1794283031"},{"product_id":"nes-game-cartridge-tray-full-replacement-mechanism","title":"NES Game Cartridge Tray - Full Replacement Mechanism","description":"\u003cp\u003eA full replacement cartridge tray mechanism for the front-loading NES, the assembly the cartridge drops into and gets pushed down with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e the front-loading NES-001. The top-loader has no tray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFixes:\u003c\/strong\u003e a tray that will not latch down, one that springs back up, a cartridge that sits visibly crooked, and a tray with snapped plastic from forty years of being pushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy this matters more than people think:\u003c\/strong\u003e a worn tray puts the cartridge into the connector at an angle. That is the real cause of blinking lights on plenty of consoles that have already had a new 72-pin fitted, and it is why a fresh connector sometimes wears out fast. If you are rebuilding the front end, do the tray and the connector together.\u003c\/p\u003e\u003cp\u003eWe sell the 72-pin connector and the guide tabs separately.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099960561,"sku":"M07736","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/m07736-001.jpg?v=1794283031"},{"product_id":"ps4-pro-slim-hdmi-port-replacement-hd-socket","title":"PS4 Pro \/ Slim HDMI Port - Replacement HD Socket","description":"\u003cp\u003ePS4 Pro or Slim powering up — fan running, light on — but nothing on the TV? Shine a torch into the HDMI socket before you assume the console is dead. If any of the flat gold pins inside are bent, pushed back or missing, that is the entire fault and the board is fine.\u003c\/p\u003e\u003cp\u003eIt nearly always happens the same way: someone trips over the cable, or the console gets moved with the lead still in, and the connector takes the leverage.\u003c\/p\u003e\u003cp\u003eBrand new replacement HD socket, HDMI compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is board-level work.\u003c\/strong\u003e The old port has to come off with hot air and the new one reflowed onto the pads. A soldering iron alone will not do it — you need a rework station, flux and practice, or a shop that has them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e PS4 Pro and PS4 Slim.\u003cbr\u003e\u003cstrong\u003eDoes not fit:\u003c\/strong\u003e the original PS4 (fat), which uses a different socket — see our PS4 original port.\u003c\/p\u003e\u003cp\u003eRule out the cable and a second TV input first. A failing HDMI lead gives you exactly the same black screen and costs nothing to test.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099993329,"sku":"P43248","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/m07515_prod2.jpg?v=1794283031"},{"product_id":"sega-genesis-repair-replacement-cable-for-controller","title":"Sega Genesis Repair Replacement Cable for Controller","description":"\u003cp\u003eA replacement 9-pin controller cable for Sega Genesis pads, with the connector already attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Genesis three-button and six-button controllers, and Mega Drive pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms it fixes:\u003c\/strong\u003e a pad that drops out when the cable is moved, directions that cut in and out, and the usual break right where the cable leaves the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e the 9-pin connector comes fitted, so all the work is at the controller end - open the pad, desolder the old cable and solder this one to the same points. Soldering required.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481099731185,"sku":"sku-45712333701282","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/Genesis-controller-cord-main.jpg?v=1794283031"},{"product_id":"psp-3000-ips-lcd-screen-replacement-display-upgrade","title":"PSP 3000 IPS LCD Screen - Replacement Display Upgrade","description":"\u003cp\u003eAn IPS replacement LCD for the PSP 3000, with better colour, deeper blacks and far wider viewing angles than the panel Sony fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e the PSP 3000 (PSP-3000 series). Not the PSP 1000 or 2000, which use different panels we list separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fixes a real PSP 3000 fault.\u003c\/strong\u003e The 3000 shipped with a screen that shows visible scanlines and ghosting in motion, bad enough that it was widely reported at launch and never fully resolved. An IPS panel removes it entirely, which is the main reason people do this swap rather than buying a replacement original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlso fixes:\u003c\/strong\u003e dead pixels, lines across the display, a cracked panel, and backlight failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e this is a full teardown. The PSP 3000 screen sits under the faceplate with a delicate ribbon into a ZIF connector. No soldering is required, but take your time with the ribbon, because tearing it means buying a second screen.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"Default Title","offer_id":67481100222705,"sku":"sku-45345473659042","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/m07699.jpg?v=1794283032"},{"product_id":"game-boy-dmg-button-pads-conductive-contact-set","title":"Game Boy DMG Button Pads - Conductive Contact Set","description":"\u003cp\u003e\u003cstrong\u003eHaving to mash the button to make it register?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eButtons that need a hard press, or only work at an angle, are almost never the buttons. It is the black conductive pad underneath - the carbon face wears through and stops bridging the contact.\u003c\/p\u003e\u003cp\u003eSold as a single set. No soldering: open the shell, lift the old pads out, drop these in. While you are in there, clean the board contacts with isopropyl - a worn pad and a dirty board usually arrive together.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"1 Set","offer_id":67481242468593,"sku":"P71289","price":2.99,"currency_code":"USD","in_stock":true},{"title":"5 Sets","offer_id":67481242501361,"sku":"sku-50787707519138","price":12.99,"currency_code":"USD","in_stock":true},{"title":"10 Sets","offer_id":67481242534129,"sku":"sku-50787707551906","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GB-DMG-main.jpg?v=1794286133"},{"product_id":"game-boy-advance-button-pads-conductive-contact-set","title":"Game Boy Advance Button Pads - Conductive Contact Set","description":"\u003cp\u003e\u003cstrong\u003eHaving to mash the button to make it register?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eButtons that need a hard press, or only work at an angle, are almost never the buttons. It is the black conductive pad underneath - the carbon face wears through and stops bridging the contact.\u003c\/p\u003e\u003cp\u003eSold as a single set. No soldering: open the shell, lift the old pads out, drop these in. While you are in there, clean the board contacts with isopropyl - a worn pad and a dirty board usually arrive together.\u003c\/p\u003e","brand":"94MER","offers":[{"title":"1 Set","offer_id":67481242566897,"sku":"P71200","price":2.99,"currency_code":"USD","in_stock":true},{"title":"5 Sets","offer_id":67481242599665,"sku":"sku-50787707650210","price":12.99,"currency_code":"USD","in_stock":true},{"title":"10 Sets","offer_id":67481242632433,"sku":"sku-50787707682978","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/files\/GBA-pads-main.jpg?v=1794286133"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0784\/8945\/collections\/video-gaming-console-handheld-repair-parts.png?v=1794286551","url":"https:\/\/retrogamingofdenver.com\/en-ca\/collections\/repair-parts.oembed","provider":"Retro Gaming of Denver","version":"1.0","type":"link"}