Silicon Power 512GB-3.8TB Enterprise Grade SATA III 6Gb/s 2.5-inch Internal Solid State Drive
[Product Features]
-2.5-inch standard form factor with SATA standard interface connector.
-Compliant with SATA revision 3.1 standard with 6.0 Gb/s transfer rate.??
-Compliant with ATA/ATAPI-8 standard and ACS-2 command protocol.
-Built-in-Voltage detector for power shielding FW protection.
-Native Command Queuing up to 32 commands
-Garbage collection and TRIM Data Set Management command
-Global wear leveling algorithm evens program/erase count
-Early weak block retirement - Supports SMART feature command set.
-Supports 28/48 bit LBA mode command
-Built-in temperature sensor (Thermal Throttling) function to adjust the access speed of NAND flash and keep the SSD system stable.??
-Standard IPC A-610E
[Product Specifications]
-ECC Capability: Hardware LDPC ECC engine (120bit/1KB) and Block/Page RAID
-Program / Erase Endurance: 3,000 P/E cycles
-Optimal sustained performance: Direct-To-TLC and SLC Cache Architecture
-Data Endurance & Data integrity: StaticDataRefresh technology, Early weak block retirement, Global Wear leveling
-Data Retention: ****
-10% of program / Erase Endurance cycles: 10 Years
-100% of program / Erase Endurance cycles: 1 Years
-Performance: (Maximum Read/Write)*
512GB:?? 540/520 MB/s
1TB: 540/510 MB/s
2TB:??540/510 MB/s
(Test Platform: Average Value is based on Serial ATA 6.0Gb/s interface.)
-IOPS:*
512GB: 49,000/82,000
1TB: 51,000/85,000
2TB:??50,000/85,000
-TBW:
512GB: 728TB
1TB: 1456TB
2TB: 2912TB
-Humidity: 10% to 95% RH, non-condensing
-Operating System: Windows XP/7/8/10, or Windows Embedded Systems, DOS, Linux
*The value is various bases on the capacity and the test platform.
**Duration: 30 min x 3 axis
*****The value is based on normal program/erase endurance at room temperature. High environmental temperature may shorten the retention period.??
