![1x2 HDMI Extender Splitter Over CAT6/7 Up to 165 Ft- Loop-Out, IR Control & EDID (HD12-EX165-K) - Just $129.99! Shop now at Retro Gaming of Denver](http://retrogamingofdenver.com/cdn/shop/files/HD12-EX165-K_B09ZKL6MXQ_01_700x700.jpg?v=1723459941)
1x2 HDMI Extender Splitter Over CAT6/7 Up to 165 Ft- Loop-Out, IR Control & EDID (HD12-EX165-K)
OREI HD12-EX165-K: 1X2 HDMI EXTENDER SPLITTER UPTO 165
- Distribute 1 HDMI source to 2 HDMI displays over cat6 network cable simultaneously
- 1 in 2 out splitter receivers with power over cable feature - no adapter needed to power the receivers
- Cat6 HDMI transmitter is equipped with 2 port Cat6 output
- 1 additional HDMI output to connect local HDMI display or monitor
- EDID management control on transmitter
- IR kit (20~60KHz) to receive the IR remote control commands from the receiver end to transmit back to the transmitter side to control to the HDMI source remotely
- Plug & play setup without any software installation
- Compatible with Cat6/7 ethernet network cables
- Use single UTP LAN cable (CAT5E/6) to substitute HDMI cable to achieve long distances transmission
- Up to Full HD resolution 1920×1080@60hz, ideal solution for HDMI exhibition, video conference, meeting rooms and bars
- This unit requires only one power adapter to work
The OREI HD12-EX165-K HDMI extender splitter allows you to transmit HDMI audio/video signals over Cat6/7 cable along with maintaining original audio/video quality to up to 2 displays remotely. It supports up to 1080p resolution and extends the transmission distance up to 165 feet (50 meters).
Durable and easy to set up and operate without any software installations. Ideal for businesses, churches, test bench facilities, data centres and help desks to duplicate HDMI signals at long range.
HDMI Loop-out - Connect HDMI display to the transmitter (sender unit) for an output to local display at the source.
IR control - enables source device to recognize remote commands from remote display side.
Power Over Cable - only use one included power adapter at transmitter (sender) side to power all the receivers
EDID Management - multiple EDID configuration options to select the perfect resolution and audio output settings for your connected displays.
[shortdes]- Supports 1080p@60Hz up to 165 feet
- Supports PoC function
- Supports EDID control via EDID selector
AUDIO AND VIDEO
Transmitter: | INPUT PORTS: | 1 × HDMI IN [Type A, 19-pin female] |
OUTPUT PORTS: | 1 × HDMI OUT [Type A, 19-pin female] | |
2 x CAT OUT [RJ45] | ||
Controls: | 1 × IR OUT [3.5mm Stereo Mini-jack] | |
1 x EDID DIP switch [4-pin] | ||
1 x UPDATE [Micro USB] | ||
Receiver: | INPUT PORTS: | 1 x IR IN [3.5mm Stereo Mini-jack] |
1 x CAT IN [RJ45, 8-pin female] | ||
OUTPUT PORTS: | 1 x HDMI OUT [Type A, 19-pin female] |
COMPLIANCES
HDMI Compliance | HDMI 1.4 |
HDCP Compliance | HDCP 1.4 |
SUPPORTED CAT CABLES
CAT5e, CAT6, CAT7: | We recommend you to use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance |
EXTENDING DISTANCE
1080p@60Hz: | 165 Feet |
VIDEO OUTPUT
Video Bandwidth: | 297MHz/10.2Gbps |
Video Resolutions: | 480i ~1080p50/60Hz, 4Kx2K@30Hz (4:4:4) |
Color Space: | RGB, YCbCr 4:4:4/4:2:2. YUV 4:2:0 |
Color Depth: | 8-bit, 10-bit, 12-bit (1080p@60Hz); 8-bit (4K30Hz) |
CEC, EARC, POC/POE, IR, DOWNSCALER, KVM, OVER IP, HDBASET, RS-232 SUPPORT
CEC Function: | No |
ARC Function: | No |
USB KVM Function: | No |
PoC/PoE Function: | Yes |
IR Controller: | Yes |
Downscaler Function: | No |
Over Network/IP Function: | No |
HDBaseT Function: | No |
RS-232 Function: | No |
LOOP-OUT/LOCAL PORT
Has loop out port: | Yes |
Number of Loop out ports: | 1 |
SWITCHES
EDID Management: | The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the display and source |
EQ Dip Switches: | Adjust the EQ dip switches according to the length of the CAT6 cable as shown in the manual |
ARC: | No |
AUDIO OUTPUT
HDMI Audio Formats: | LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio |
SIGNALS
TMDS Signals: | 3.3V |
DDC Signals: | 5V |
Maximun Pixel Clock: | 148.5MHz |
DIMENSIONS & WEIGHT
Transmitter: | Height: | 18mm |
Width: | 175mm | |
Depth: | 82mm | |
Weight: | 366g | |
Receiver: | Height: | 16.5mm |
Width: | 79.5mm | |
Depth: | 69mm | |
Weight: | 130g |
PROTECTION
Operation Temperature: | 0°C ~ 40°C / 32°F ~ 104°F |
Storage temperature: | -20°C ~ 60°C / -4°F ~ 140°F |
Relative Humidity: | 20~90% RH (Non-condensing) |
ESD Protection: | Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
Electrostatic Protection of the whole Machine: | Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
RJ-45 CONNECTOR Type
WE/SS 8P8C |
POWER
Power Consumption (Max): | 5.4W |
Power Supply: | 12V/1A DC |
PHYSICAL PROPERTIES
Color: | Black |
Housing: | Metal Enclosure |
Processing Technology: | Metal Plate |
Finishing: | Powder Spraying Technology ,Screen Printing |
PACKAGE CONTENTS
1 × HDMI 1×2 Splitter |
2 × CAT Receiver |
1 × IR Blaster Cable (1.5 meters) |
2 × IR Receiver Cable (1.5 meters) |
2 × Mounting Ear |
1 × 12V/1A DC Locking Power Adapter |
4 × Machine Screw (KM3*4) |
1 × User Manual |
WARRANTY
1 - Year Manufacturer's Warranty |
[tab1]
FAQs
Yes, you can purchase these things directly from us. Please contact us & we will assist you further.
No, this product doesn not extend multiple screens. It will duplicate the input sources to multple outputs.
Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable.
Yes, you can implement the daisy chain method.
Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed.
We recommend you to use High-Quality HDMI cables & shielded CAT6 cables.
Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price.
Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price.
You can extend the display devices up to 165 Feet when using with a shielded CAT6 cable.
The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable.
If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead.
Please contact us so that we can troubleshoot the issue.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control