4K UltraHD 1x8 HDMI Extender Splitter Over CAT6/7 Up to 400 Ft with HDBaseT Technology & POC (UHD18-EXB400-K)
OREI UHD18-EXB400-K: UltraHD 1x8 Extender Splitter HDBaseT upto 400 Feet
- Distribute 4K 1 HDMI source to 8 HDMI displays over Cat6/7/8 Network Cable simultaneously
- Splitter Included - No Switcher Needed - Power Over LAN - No Adapter needed on Receiver Side
- HDBaseT Technology for lossless and lag-free video transmission
- Output 4K signal up to 400 Feet with Cat6/7 cable and 1080p signal up to 500 Feet
- HDMI Transmitter is equipped with 8 Port CAT6 Output
- 1 Additional HDMI Output to connect to a local display or monitor
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG
- Loop Out on Sender Unit
- Full IR Remote Control Input
- Supports 20~60Hz IR Pass Back
- Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables that forward commands over a dedicated DDC Channel
- Supports 18Gbps Bandwith
- HDMI 2.0a HDCP 2.2, UHD 4K/60Hz YUV 4:4:4, HDR, HDR10+, Dolby Vision, PoC
- HDR gives you higher contrast and vivid colors
- Supports DTS-HD, Dolby TrueHD, 7.1ch digital audio, and all other HDMI standard formats
- Compatible with CAT6/6a/7 Network Cables
- The highest Resolution Supported is 3840x2140p@60Hz
- Ideal Solution for HDMI Exhibition, Video Conference, Meeting rooms and Bars, etc.
- Plug & Play Setup without any Software Installation
- This unit requires only one power adapter to work
This Orei UHD18-EXB400-K HDMI extender splitter includes one transmitter and eight receivers, extend 1 HDMI source to 8 HDMI displays over a single CAT6/6a/7 cable up to 400 at 4K signal, or up to 500 Feet with 1080P. Perfect for Bars, Restaurants, in-home entertainment system. Advanced EDID Management.
Resolution Supported: 4K@60Hz, 4K@30Hz, 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz,1080i@50/60Hz,1080p@50/60Hz.
HDMI Audio Formats: LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD,
Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X.
Coaxial Audio Formats: PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1.
Analog Audio Formats: PCM 2.0CH.
[shortdes]
- Supports HDBaseT 4K@60Hz up to 400 feet
- Supports digital and analog audio de-embedded output
- Supports one-way PoC function (only from transmitter to receiver), one-way IR control signal pass-through
AUDIO AND VIDEO
| INPUT PORTS: | 1x HDMI Type A (19-pin female) | |
| OUTPUT PORTS: | 1x HDMI Type A (19-pin female) | |
| 8x HDBaseT OUT [RJ45] | ||
| 1x Coaxial Audio OUT [RCA] | ||
| 1x L/R Audio OUT [5-pin phoenix connector] | ||
| Control Ports: | 1x RS-232 (3-pin phoenix connector） | |
| 1x EDID DIP switch [5-pin] | ||
| 1x IR IN [3.5mm Stereo Mini-jack] | ||
| 1x IR OUT [3.5mm Stereo Mini-jack] |
COMPLIANCES
| HDMI Compliance: | HDMI 2.0b |
| HDCP Compliance: | HDCP 2.2/1.x |
SUPPORTED CAT CABLES
| CAT5e, CAT6, CAT7: | We recommend you to use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance |
EXTENDING DISTANCE
| 4K@30Hz: | 400 Feet |
| 1080p@60Hz: | 500 Feet |
VIDEO OUTPUT
| Video Bandwidth: | 18 Gbps |
| Video Resolutions: | 480i@30/60Hz, 480p@60/120/240Hz, 640x480p@60Hz, 576i@25/50/100Hz, 576p@50/100/200Hz, 720p@24/25/30/50/60/100/120Hz, 1680x720p@24/25/30/50/60/100/120/Hz, 1080i@25/30/50/60Hz, 1080p@24/25/30/50/60/100/120Hz, 2560x1080p@24/25/30/50/60Hz, 2160p@24/25/30/50/60Hz, 4096x2160p@24/25/30/50/60Hz, 640x350p@85Hz, 640x400p@85Hz, 640x480p@60/67/72/75/85Hz, 720x400p@70/85Hz, 800x600p@56/60/82/75/85/120Hz, 832x624p@75Hz, 648x480p@60Hz, 852x480p@60Hz, 1024x768i@43Hz, 1024x768p@60/70/75/85Hz, 1152x864p@75Hz, 1152x870p@75Hz, 1280x720p@60Hz, 1280x768p@60/75/85/120Hz, 1280x800p@60/75/85/120Hz, 1280x960p@60/85Hz, 1280x1024p@60/75/85/96Hz (Only HDMI Loop out supports 96Hz, output on the receiver end cannot support this), 1360/768p@60Hz, 1366x768p@60Hz, 1400x788p@60Hz, 14400x1050p@60Hz, 1440x900(RB)@60Hz, 1440x900p@60/75/85Hz, 1440x960p@72Hz, 1600x900p@60Hz, 1600x1024p@60Hz, 1600x1200p@50/60/65/70/75/85Hz, 1680x1050p@60Hz, 1792x1344p@60Hz, 1792x1344@60/75Hz, 1856x1392@60/75Hz, 1920x1080p@60Hz, 1920x1080p@60Hz, 1920x1200p@50/60Hz, 1920x1440@60/75Hz, 2048x1152p@60Hz, 2048x1280p@60Hz, 2560x1440(RB)@60Hz, 2560x1600(RB)@60Hz (Only HDMI Loop out supports 60Hz, output on the receiver end cannot support this), 2560x1600p@75/85Hz (Only HDMI Loop out supports 75/85Hz, output on the receiver cannot support this) |
| Color Space: | RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0 |
| Color Depth: | 8-bit,10-bit,12-bit(1080p@60Hz) 8-bit (4K2K@60Hz YUV4:4:4) 8-bit,10-bit,12-bit(4K2K@60Hz YCbCr 4:2:2/4:2:0) |
| HDR: | Support HDR, HDR10+, HLG, Dolby vision |
CEC, EARC, POC/POE, IR, DOWNSCALER, KVM, OVER IP, HDBASET, RS-232 SUPPORT
| CEC Function: | No |
| ARC Function: | No |
| USB KVM Function: | No |
| PoC/PoE Function: | Support one-way POC function (only from transmitter to receiver) |
| IR Controller: | Yes |
| Downscaler Function: | No |
| Over Network/IP Function: | No |
| HDBaseT Function: | Yes |
| RS-232 Function: | Yes |
LOOP-OUT/LOCAL PORT
| Has loop out port: | Yes |
| Number of Loop out ports: | 1 |
SWITCHES
| EDID Management: | It is used to set EDID mode. Please refer to the manual for more detail |
AUDIO OUTPUT
| HDMI Audio Formats: | LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X |
| Coaxial Audio Formats: | PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1 |
| L/R Audio Formats: | PCM 2.0CH |
SIGNALS
| TMDS Signals: | 3.3V |
| DDC Signals: | 5V |
DIMENSIONS & WEIGHT
| Transmitter: | Height: | 44mm |
| Width: | 440mm | |
| Depth: | 130mm | |
| Weight: | 1.62kg | |
| Receiver: | Height: | 18mm |
| Width: | 140mm | |
| Depth: | 65mm | |
| Weight: | 246g |
PROTECTION
| Operation Temperature: | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage temperature: | -20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity: | 20~90% RH (non-condensing) |
| ESD Protection: | Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
| Electrostatic Protection of the whole Machine: | Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
RJ-45 CONNECTOR Type
| WE/SS 8P8C |
POWER
| Power Consumption (Max): | 72W | ||||
| Power Supply | Input: | AC100 - 240V 50/60Hz | |||
| Output: | DC 24V/3.75A (US/EU standards, CE/FCC/UL certified) |
PHYSICAL PROPERTIES
| Color: | Black |
| Housing: | Metal Enclosure |
| Processing Technology: | Metal Plate |
| Finishing:: | Powder Spraying Technology Screen Printing |
PACKAGE CONTENTS
| 1x HDBaseT Transmitter |
| 8x HDBaseT Receivers |
| 9x IR Blaster Cable (1.5 meters) |
| 9x 20K~60KHz IR Receiver Cable (1.5 meters) |
| 9x 3-pin Phoenix Connector |
| 1x 5-pin Phoenix Connector |
| 18x Mounting Ear |
| 1x 24V/2.7A DC Locking Power Adapter |
| 1x User Manaul |
WARRANTY
| 1-Year Manufacturer's Warranty |
[tab1]
FAQs
Yes, you can purchase these things directly from us. Please contact us & we will assist you further.
No, this product doesn not extend multiple screens. It will duplicate the input sources to multple outputs.
Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable.
You can upgrade the firmware by connecting the PC & this device via RS-232 cable.
Yes, you can implement the daisy chain method.
Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed.
We recommend you to use High-Quality HDMI cables & shielded CAT6 cables.
Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price.
Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price.
No, this product doesn't upscale/downscale the video resolutions.
You can extend the display devices up to 400 Feet when using with a shielded CAT6 cable.
The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable.
If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead.
Please contact us so that we can troubleshoot the issue.
HDBaseT is the technology used for long distance transmission of lossless signals, resulting extremely low latency & giving the best picture quality.
In normal extenders, if you extend your signals up to some extend, the quality of the signals will degrade & you may find some latency issues. HDBaseT is the lastest standard which provides extending your signals to the longer distance without degrading the quality of the signals & with 0 latency.
We recommend you using a shielded CAT6 cables for optimum performance.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control
